Technical data

Button LED Flash Rate (PGM 234) A-99
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
[HOLD] button LED status while Paging. 13 Color 1-3
Flashing Rate 00-14
Flash: 60 IPM
Color: RED
[HOLD] button LED status when in Voice-over mode. 14 Flash: 60 IPM
Color: AMBER
[HOLD] Reserved. 15 Flash: 60IPM
Color: AMBER
[RING] LED status when receiving an intercom call. 16 Flash: 60 IPM
Color: RED
[RING] LED status when receiving an incoming CO
call.
17 Flash: 60 IPM
Color: RED
[RING] LED status when a message is left. 18 Flash: 60 IPM
Color: RED
[HEADSET] LED status when the headset is used
(LIP-8000 Phone).
19 Flash: Steady
Color: RED
HEADSET] LED status when Bluetooth™ is used
(IP-8000 Phone).
20 Flash: 60 IPM
Color: RED
[DN] button LED status when I use is active. 21 Flash: Steady
Color: GREEN
[DN] button LED status when another station is in use. 22 Flash: Steady
Color: RED
[DN] button LED when status in DND. 23 Flash: Off
Color: RED
[DN] button LED status when receiving an intercom
call.
24 Flash: 60 IPM
Color: GREEN
[DN] button LED status when call is in Held state. 25 Flash: 60 IPM
Color: AMBER
[DN] button LED status when Call forward is set. 26 Flash: Off
Color: RED
[DN] button LED status when I am in conference. 27 Flash: Steady
Color: GREEN
[DN] button LED status when another station is in
conference mode.
28 Flash: Steady
Color: RED
[DN] button LED status when active conference
supervisor.
29 Flash: 60 IPM
Color: AMBER
PGM 234 BTN RANGE DEFAULT
Release 1.0
November 2010