Technical data

Button LED Flash Rate (PGM 234) A-98
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Button LED Flash Rate (PGM 234)
The LED Color and Flash Rate for various functions and states can be assigned to any one of
15 System signals. The various functions and states are shown in the Tables (refer to [COLOR]
and [FLASH RATE] Tables).
1. Press the [PGM] button and dial 234.
2. Enter the Function range to change the LED Color or Flash rate (refer to Tables).
3. Press the Flex button 1 and dial (1-3) for LED color
OR
4. Press the Flex button 2 and dial (00-14) for LED flash rate.
5. Press the [SAVE] button to store.
PGM 234 BTN RANGE DEFAULT
[CALL BACK] button LED status intercom call back is
active.
1 Color 1-3
Flashing Rate 00-14
Flash: 30 IPM
Color: RED
[CALL BACK] button LED status CO queuing is in use. 2 Flash: 120 IPM
Color: RED
[CALL BACK] button LED status when a message is
left.
3 Flash: 120 IPM
Color: RED
[MUTE] button LED status when voice is muted. 4 Flash: Steady
Color: RED
[MUTE] button LED status when COS is down. 5 Flash: 120 IPM
Color: RED
[DND] button LED status in DND. 6 Flash: Steady
Color: RED
[DND] button LED status in one time DND. 7 Flash: 60 IPM
Color: RED
[DND] button LED status when Station assigns a
preselected message.
8 Flash: 15 IPM
Color: RED
[CALL BACK] button LED status when ACNR is in use. 9 Flash: 480 IPM
Color: RED
[SPEAKER] button LED status when on a conversation
using the speakerphone.
10 Flash: Steady
Color: RED
[SPEAKER] button LED status when on a conversation
using the headset.
11 Flash: Steady
Color: RED
[SPEAKER] button LED status when receiving an
intercom call.
12 Flash: 60 IPM
Color: RED
Release 1.0
November 2010