Technical data

System Date, Time (PGM 233) A-97
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
System Date, Time (PGM 233)
The system Date, Time is established by this entry. The date and time are employed for several
features and functions including; LCR, LCD displays, SMDR outputs, Auto Ring Mode
Selection, Wake-Up Alarm, etc.
1. Press the [PGM] button and dial 233.
2. Press the Flex button for the desired Attribute, refer to the following Table.
Flex 1: Time
Flex 2: Date
3. Use the dial pad to enter desired data for the Attribute
4. Press the [SAVE] button to store the data entry.
- SMDR MAIL AUTO SEND MODE -- If the
SMDR buffer is full, the system can automatically
send a notification by e-mail.
Web
Only
0:Off
1:On
1:On
- SMDR MAIL AUTO DELETE MODE -- Deletes
SMDR records after sending e-mail.
0:Off
1:On
1:On
PGM 233 BTN RANGE DEFAULT
SET SYSTEM TIME/DATE -- Sets the system time. 1 HH:MM -
SET SYSTEM TIME/DATE -- Sets the system date. 2 MMDDYY -
DST ENABLE MODE -- Enables DST feature for System
Time.
3 0:Off
1:On
0:Off
- DST START TIME -- The DST start time. Web
Only
See DST Table 2nd Sunday of
March at 2:00 AM
- DST END TIME -- The DST end time. See DST Table 1st Sunday in
Nov., at 2:00 AM
PGM 232 BTN RANGE DEFAULT
Release 1.0
November 2010