Technical data

SMDR Attributes (PGM 232) A-94
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
SMDR Attributes (PGM 232)
Station Message Detail Recording (SMDR) is an ASCII output of details on both incoming and
outgoing calls. Various SMDR attributes can be assigned including: output records for all calls
or Long Distance (LD) only, call cost per pulse when using call metering, etc. (refer to Table for
a description of each Attribute, LCD displays and the data entries required).
1. Press the [PGM] button and dial 232.
2. Select the desired Flex button, refer to the following Table.
3. Use the dial pad to enter the desired data.
4. To save SMDR Attribute data, press the [SAVE] button.
PGM 232 BTN RANGE DEFAULT
SMDR SERVICE -- SMDR Service Option.
On-Line / Off-Line SMDR / SMDR-Interface /
Email Service .can be enabled
1 0: Not Use
1: On-Line
2: Off-Line
3: On-Line/Off-Line
4: SMDR-Interface
5: SMDR E-Mail
6: Off-Line & E-Mail
7: On/Off-Line & E-Mail
8: Interface & E-Mail
0:Not Use
OUTGOING REPORT -- Outgoing Call Report
Option for SMDR Service.
If this option is set, outgoing call will be included
at SMDR data
20:Off
1:On
0:Off
INCOMING REPORT -- Incoming Call Report
Option for SMDR Service.
If this option is set, incoming call will be included
at SMDR data
30:Off
1:On
0:Off
ICM REPORT -- Internal Call Report Option for
SMDR Service.If this option is set, internal call
will be included at SMDR data
40:Off
1:On
0:Off
LOST CALL REPORT -- Outgoing or Incoming
Lost Call Report Option for SMDR Service. If this
option is set, CO lost call will be included at
SMDR data
50:Off
1:On
0:Off
Release 1.0
November 2010