Technical data

Serial Port Function Selections (PGM 231) A-93
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Serial Port Function Selections (PGM 231)
The System has one RS 232 serial port located on the MPB. Also, the System can employ IP
over 5 TCP channels for the output of various system information.
Each output function is assigned a Serial port or TCP channel that is used to output the
information. In addition, a TCP port must be assigned when a function is defined to use a TCP
channel.
NOTE: Each function can be defined to use only one output (refer to Table for a description of the
selections, the data entries required and LCD displays).
1. Press the [PGM] button and dial 231.
2. Select the desired Flex button, refer to the following Table.
3. Use the dial pad to enter the desired Port data:
0: COM(Serial port on MPB)
1: TCP channel 1
2: TCP channel 2
3: TCP channel 3
4: TCP channel 4
5: TCP channel 5
4. Press the [SAVE] button to store the data entry.
PGM 231 BTN RANGE DEFAULT
ON LINE SMDR -- Defines the serial port or TCP channel used for
the On-line SMDR.
10-5 COM
OFF LINE SMDR -- Defines the serial port or TCP channel used for
Off-line SMDR.
20-5 COM
SMDI -- Defines the serial port or TCP channel used for the SMDI
output.
3 0-5 COM1
CALL INFO -- Defines the serial port or TCP channel used to receive
Call Information output.
40-5 COM
TRAFFIC -- Defines the serial port or TCP channel used for the
TRAFFIC report output.
50-5 COM
TRACE -- Defines the serial port or TCP channel used for the Trace
output.
60-5 COM
ADMIN -- Defines the serial port or TCP channel used for the ADMIN
Report output.
70-5 COM
Release 1.0
November 2010