Technical data

System Timers II (PGM 222) A-87
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
System Timers II (PGM 222)
LCO RING OFF TMR -- sets the maximum 'OFF' duration
of the incoming ring cycle to determine when a call has
been abandoned.
5 010-150 (100 msec) 060
LCO RLS GUARD TMR -- when an analog CO Line is
returned to idle, the system will deny access for this time to
assure the PSTN returns the CO circuitry to idle.
6 00-60 (minutes) 010
PGM 222 BTN RANGE DEFAULT
DOOR OPEN TMR -- Sets the minimum contact closure time
required to activate the contact assigned as a door open
contact.
1 05-99 (100 msec) 20
MSG WIT ALERT TONE TMR -- A phone user will receive
periodic reminder tones of a message waiting at intervals
based on this timer.
2 00-60 (minutes) 00
INTER DIGIT TMR -- Sets the maximum allowed time
between user dialed digits; at expiration, the user will receive
an error-tone.
3 00-300 (seconds) 015
INC CO INTER DIGIT TMR -- Sets the maximum allowed
time between dialed digits from the Incoming CO.
4 01-60 (seconds) 15
NORMAL NO ANSWER TMR -- No answer timer for normal
CO ring
5 001-600 (seconds) 30
DID NO ANSWER TMR -- No answer timer for DID CO ring 6 001-600 (seconds) 30
CO RECALL NO ANS TMR -- No answer timer for recall CO
ring
7 001-600 (seconds) 30
CO FWD NO ANSWER TMR -- No answer timer for forward
CO ring
8 001-600 (seconds) 30
CO XFER NO ANSWER TMR -- No answer timer for transfer
CO ring
9 001-600 (seconds) 30
PGM 221 BTN RANGE DEFAULT
Release 1.0
November 2010