Technical data

SYSTEM DATA - PGM 220-242 A-85
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
SYSTEM DATA - PGM 220-242
A number of timers can be assigned to control and affect many features and functions of the
System (refer to Tables for a description of the timers and the input required).
1. Press the [PGM] button and dial:
220 for System Timers I
221 for System Timers II
222 for System Timers III.
2. Press the Flex button for the desired Timer; refer to Tables 2.3.6.1-1 to 3.
3. Use the dial pad to enter the desired Timer data.
4. Press the [SAVE] button to store the Timer data entry.
System Timers I (PGM 220)
PROMPT ANNC INTVL -- The VMIB Prompt or
Announcement Repeat interval when VMIB
Prompt or announcement. Repeat is assigned.
60-100 0
CCR USE -- This option is defined during
announcement will be played, usage of CCR
feature.
70:Off
1:On
0:Off
PGM 220 BTN RANGE DEFAULT
CO-CO TRANS TMR -- Determines the answer waiting time
when CO line is transferred to another CO line. If not answered
in this time, transferred CO call is disconnected.
1 000-300 secs 030
HOT-DESK LOGOUT TMR -- Determines the amount of time the
attendant receives recall after which the system will disconnect
the call.
2 00-24 hrs 00
ACNR PAUSE TMR -- This timer establishes the time between
ACNR attempts.
3 005-300 secs 030
PAGE TIME OUT TMR -- Determines the maximum duration of
a page after which the caller and Page Zone are released.
4 000-300 secs 15
PGM 215 BTN RANGE DEFAULT
Release 1.0
November 2010