Technical data

PTT Group (PGM 208) A-75
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
PTT Group (PGM 208)
Each Phone can be assigned as a member of one or more Push-To-Talk groups. The PTT
Group capacities for the MBX IP system are shown in the table below.
PTT Group Capacities
1. Press the [PGM] button and dial 208.
2. Use the dial pad to enter the desired Page Group (0-9 for the MBX IP 100 and the MBX IP
300). The system will display the member of PTT group.
NOTE: For group members, enter a station or station range. For an individual station press the desired
Flex button for the position of the station in the group and dial the station number. For a range,
enter the first and last station number in the range
3. Press the [SAVE] button to store the data entry.
PGM 206 BTN RANGE DEFAULT
ON HOOK SERVICE -- on hoDetermines the On Hook
Service; if On Hook Allow is set, the system allows ON
HOOK service. When Recall is selected, system will
RECALL when user Station is on-hook.
1 0: On Hook Allow
1: Recall
On Hook Allow
ONE WAY BUSY -- Determines the handling of One Way
Busy calls.
20: Busy
1: Reqest Queuing
2: Recover Call
Busy
BOTH WAY BUSY -- Determines the handling of Both
Way Busy calls
30: Busy
1: Reqest Queuing
2: Recover Call
Busy
ITEM MBX IP 100 MBX IP 300
Number of Groups 10 10
Members in a Group 50 50
PGM 208 BTN RANGE DEFAULT
PTT MEMBER ASG -- this entry assigns stations as members of a
PTT group.
1- -
Release 1.0
November 2010