Technical data

Command Call Group (PGM 206) A-74
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
1. Press the [PGM] button and dial 205.
2. Use the dial pad to enter the desired Page Group (01-15 for the MBX IP 100 and 01-30 for
the MBX IP 300). The system will display the member of Page group.
NOTE: For group members, enter a station or station range. For an individual station press the desired
Flex button for the position of the station in the group and dial the station number. For a range,
enter the first and last station number in the range
3. Press the [SAVE] button to store the data entry.
Command Call Group (PGM 206)
Stations and external contacts can be arranged in groups so that a user may create a
conference with all members of the group via a single call. Member assignment is only available
using the Web admin (refer to the following table and the data entries required, as well as the
MBX IP Web Admin Manual).
Command Call Group Capacities
1. Press the [PGM] button and dial 206.
2. Use the dial pad to enter the desired Command Call group (01-10 for the MBX IP 100 and
MBX IP 300). The system will display the attribute of Command Call group.
NOTE: For group members, only available using Web Admin.
3. Press the [SAVE] button to store the data entry.
PGM 205 BTN RANGE DEFAULT
PAGE MEMBER ASG -- assign stations as members of a Page
group.
-- -
ITEM MBX IP 100 MBX IP 300
Number of Groups 10 10
Members in a Group 12 12
Release 1.0
November 2010