Technical data

Voice Mail Group Attributes (PGM 203) A-72
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Voice Mail Group Attributes (PGM 203)
Voice Mail group has available attributes relating to dialing service as put mail, get mail, etc.
The following table provides descriptions for the attributes and data entries required.
1. Press the [PGM] button and dial 203.
2. Use the dial pad to enter the desired Station Group number (620-639 for the MBX IP 100
and 620-669 for MBX IP 300).
3. Press the Flex button for the desired attribute; refer to the following Table.
4. Use the dial pad to enter the desired Group Attributes data, refer to the following Table.
5. Press the [SAVE] button to store the data entry.
RING NO ANS TMR -- This entry defines ring no answer
timer. If this timer is expired, a call is routed to the forward
destination according to forward type.
80-180 0
PROVIDE ANNC.-- This entry defines if system answer the
call when a greeting or queuing announcement is provided
9 0: With Answer
1: W/o Answer
With Answer
PGM 203 BTN RANGE DEFAULT
VM PUT MAIL INDEX -- For external analog Voice Mail groups, an
index to the Voice Mail Dial Table, which contains the "Put Mail" dial
code.
11-9 1
VM GET MAIL INDEX --For external analog Voice Mail groups, an
index to the Voice Mail Dial Table, which contains the "Get Mail" dial
code.
21-9 2
VM BUSY INDEX -- For external analog Voice Mail groups, an index
to the Voice Mail Dial Table, which contains the "Busy" dial code.
31-9 3
VM NO ANSWER INDEX -- For external analog Voice Mail groups,
an index to the Voice Mail Dial Table, which contains the "No answer"
dial code.
41-9 4
VM DISCONNECT -- For external analog Voice Mail groups, an index
to the Voice Mail Dial Table, which contains the "Disconnect" dial
code.
51-9 9
SMDI TYPE -- This entry defines SMDI Type. 6 0: Type 1
1: Type 2
Type 1
SMDI CLI INFO -- This entry defines SMDI CLI Information.
If this is enable, system sends SMDI with CLI.
7 0: Off
1: On
Off
PGM 202 BTN RANGE DEFAULT
Release 1.0
November 2010