Technical data

Alternate Ring Assignment (PGM 181) A-66
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Alternate Ring Assignment (PGM 181)
The Supplementary Ring Assignment Table, is used for programming alternate ring
destinations which can be stations or any feature code (stations do not have a delay value).
1. Press the [PGM] button and dial 181.
2. Enter Table index.
3. Press the desired Flex button; refer to Following Table
4. Use the dial pad to enter desired data for the Attribute.
5. Press the [SAVE] button to store the data entry.
SYSTEM GROUP DATA - PGM 200-215
Stations can be grouped for call routing, dialing, call pick-up, or various purposes.
The following groups can be defined:
• Station Group: Terminal / Circular / Ring / Longest Idle / VM
• Pick Up Group
• Paging Group
• Command call Group
•PTT Group
• Interphone Group
• Pilot Hunt Group
PGM 181 BTN RANGE DEFAULT
SERVICE TYPE -- If set as 0-2, ring option is applied to ring
assigned stations. Otherwise, if set to 3, feature code is
activated for incoming calls.
1 0: All Ring
1: First Idle
2: Circular
3: Feature Code
All Ring
CO RING ASSIGN -- Destination stations can be edited using
a range or one by one. If press Flex 1-4 and then dial station
range (up to 30 stations) or edit one station number.
2 (00-30) or one
station number
-
FEATURE CODE -- If set to Feature Code and valid feature
code is assigned, then assigned feature is activated when
there is an incoming call.
NOTE: Feature Code is not applied to rerouted calls.
3 Valid Feature
Code (Refer to
PGM115)
-
FEATURE DELAY -- If Service type is set to Feature code, it
can be delayed.
4 00-30 (secs) 00
Release 1.0
November 2010