Technical data

CO DTMF Sending Delay Timer (PGM 175) A-62
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
CO DTMF Sending Delay Timer (PGM 175)
When making outgoing CO calls, the time interval to send DTMF tones of each digit can be
adjusted. This feature is useful for the Speed Dial or Redial feature.
1. Press the [PGM] button and dial 175.
2. Use the dial pad to enter a CO line range. For a single CO Line, enter the same number
twice. For MBX IP-100, acceptable range is 01-80, for MBX IP-300, the acceptable range
is 001-240.
3. Press the desired Flex button; refer to Following Table.
4. Use the dial pad to enter desired data for the Attribute.
5. Press the [SAVE] button to store the data entry.
PGM 175 BTN RANGE DEFAULT
FIRST DTMF DELAY -- delay time before sending first digit 1 00-90 (100 msec) 05
SECOND DTMF DELAY -- delay time before sending next
digit after sending first digit DTMF tone.
2 00-90 (100 msec) 02
THIRD DTMF DELAY -- delay time before sending next digit
after sending second digit DTMF tone.
3 00-90 (100 msec) 02
FORTH DTMF DELAY -- delay time before sending next digit
after sending third digit DTMF tone.
4 00-90 (100 msec) 02
FIFTH DTMF DELAY -- delay time before sending next digit
after sending forth digit DTMF tone.
5 00-90 (100 msec) 02
SIXTH DTMF DELAY -- delay time before sending next digit
after sending fifth digit DTMF tone.
6 00-90 (100 msec) 02
MORE THAN 7 -- delay time before sending next digit after
sending sixth digit DTMF tone.
7 00-90 (100 msec) 02
Release 1.0
November 2010