Technical data

CO/IP Access 3-37
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
RELATED FEATURES
Hold Recall … see page 3-101
Call Transfer, Station … see page 3-30
Unsupervised Conference … see page 3-53
CO/IP Access
Stations can access outgoing CO/IP lines based on CO/IP Group Access programming. Digital
Phones may use flexible buttons assigned to access a specific {CO} line, using a {CO ACCESS
CODE} for outgoing calls.
CONDITIONS
- When a user dials a {CO Access Code}, the system will search the assigned CO
group for an idle CO/IP line, if there is no idle CO/IP line then the system will search
the 1st CO/IP Group for an idle CO/IP line; the user will receive a busy tone.
- A telephone user not allowed access to a CO/IP line will receive an error tone when
access is attempted; the station may receive transferred calls despite denied access
on the line but will not be able to flash or use the CO/IP line for an outgoing call.
- A station denied access to a CO/IP line but assigned to receive CO/IP line calls may
answer incoming calls. The user may transfer calls but cannot make an outgoing call
on the CO/IP line.
- CO/IP lines placed on hold may be retrieved by dialing the {Retrieve Held CO/IP code}
and the CO/IP line number.
- The Tx path to a station will be muted until the system has verified the Toll Restriction
for the CO/IP line.
- When a CO line is seized, the system will monitor the line for dial tone.
- The System selects lines from a group using the Round Robin, First-Choice or
Last-Choice method based on Admin Programming.
CCR INTER-DGT TMR -- Inter-digit timer used with Customer
Call Routing function.
11 01-30 secs 03
WEB PSWD GUARD TMR -- If no data packets are received
during a Web Admin connection for the Guard time, a password
check will be initiated by the system.
12 001-999 mins 5
PGM 220 BTN RANGE DEFAULT
Release 1.0
November 2010