Manualshelf

Technical data

ManualsBrandsVertical ManualsComputer equipmentSUMMIT IP
621622623624625626627628629630
Incoming CO Normal/DISA Attributes (PGM 168) A-55
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Incoming CO Normal/DISA Attributes (PGM 168)
If the CO line is set to Normal type, it can have normal CO Attributes including DISA service
option.
1. Press the [PGM] button and dial 168.
2. Use the dial pad to enter a CO line range. For a single CO Line, enter the same number
twice. For MBX IP-100, acceptable range is 01-80, for MBX IP-300, the acceptable range
is 001-240
3. Select Day mode and Press the desired Flex button; refer to Following Table
4. Use the dial pad to enter desired data for the Attribute.
5. Press the [SAVE] button to store the data entry.
CO Incoming Alternate Destination (PGM 169)
When a DID or DISA is routed to an abnormal destination, the call can be rerouted to alternate
destination. The destination is separately defined for Day/ Night/ Timed mode according to
several conditions.
1. Press the [PGM] button and dial 169.
2. Use the dial pad to enter a CO line range. For a single CO Line, enter the same number
twice. For MBX IP-100, acceptable range is 01-80, for MBX IP-300, the acceptable range
is 001-240
3. Select Day mode and Dial Error Type; refer to Following Table.
4. Press the desired Flex button; refer to Following Table
5. Use the dial pad to enter desired data for the Attribute.
6. Press the [SAVE] button to store the data entered.
PGM 168 BTN RANGE DEFAULT
CO ACCESS FROM DISA -- If this feature is set to ON, CO to CO
call can be made from DISA line.
10: Off
1: On
Off
DISA TO CO PASSWORD -- When making CO-to-CO call from
DISA line, password can be requested.
20: Off
1: On
Off
DISA RETRY COUNT -- When DISA call is failed to route desired
destination, the call can be retried as much as Retry Count.
31-9 3
PRESET FORWARD TIME -- If the CO is not answered in Preset
Forward Time, it will be routed to assigned ring Table.
4 00-20 (sec) 00
PRESET FWD RING TEL -- Preset Forward ring Table index can be
assigned. (Refer to PGM 181)
501-80 -
Release 1.0
November 2010