Technical data
CO Incoming Attribute I, II - PGM 165-166 A-53
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
CPT DETECT -- If this feature is set to ON, Call processing
tone is detected to disconnect LCO line.
50: Off
1: On
On
ANSWER WAITING CALL -- If this feature is set to ON, system
sends answer when call is waited.
60: Off
1: On
Off
UNIVERSAL ANSWER -- If this feature is set to ON, any
station to answer a call on the CO Line by dialing the Universal
Answer feature code.
70: Off
1: On
Off
RLS GUARD TIME -- If CO release signaling is not completed
successfully, CO line is disconnected when timer expires.
8 00-15 (sec) 01
UNSUP CONF TIMER -- When there is conference call
without supervisor, or there is any CO-to-CO call, the call is
disconnected after timer expires. The warning tone is heard
before the line is disconnected.
9 000-255 (min) 000
WAIT CLRFWD TIME -- Clear Forward Waiting Time. 10 001-300 (sec) 300
MAX RING TIME -- Max. Ring Time for when incoming CO
calls are transferred/recalled.
11 015-300 (sec) 120
DISA SUPERVISION TMR -- DISA Supervision Timer. 12 1-9 (sec) 2
VMIB PLAY DELAY TMR -- Determines the amount of time
paused before playing VMIB announcement.
13 0-9 (sec) 0
INCOMING TIME TABLE -- The time Table index to be applied
to incoming CO Call.
14 1-9, none none
CO DELAY ANSWER TMR -- For Incoming calls on the ISDN
Line, this parameter defines the delay time between Alerting
and Connect Message.
15 0-100 (100msec) 0
OFFNET FWD USAGE -- ISDN lines can be set to use Call
Deflection/Call Rerouting service if PSTN supports these
feature.
16 0:Join
1:Call Deflection
2:Call Rerouting
Join
PGM 166 BTN RANGE DEFAULT
Release 1.0
November 2010