Technical data

CO Incoming Attribute I, II - PGM 165-166 A-52
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
CO Incoming Attributes II (PGM 166)
ICLID SERVICE -- if this feature is set to ON, incoming
call is routed according to ICLID Table(PGM 262)
7 0: Off
1: On
Off
OWN CODE TO TRANSIT CLI -- if this feature is set to
ON, original caller's CLI is sent when there is transit call.
8 0: Off
1: On
Off
OWN CODE -- Own Code. 9 Max 16 digits -
CLI PREFIX CODE -- prefix code is inserted ahead of
received CLI data according to call type.
10 Max 2 digits -
INTERNATIONAL CODE -- International Code is
inserted ahead of received CLI data according to call
type.
11 Max 4 digits -
TRANSIT CLI 1 -- if Transit CLI type of outgoing CO line
is set to 1, Transit CLI 1 is sent.
12 Max 24 digits -
TRANSIT CLI 2 -- if Transit CLI type of outgoing CO line
is set to 2, Transit CLI 2 is sent.
13 Max 24 digits -
TRANSIT CLI 3 -- if Transit CLI type of outgoing CO line
is set to 3, Transit CLI 3 is sent.
14 Max 24 digits -
CLI CONV TABLE -- CLI Conversion Table index. 15 1-9 1
HOLIDAY RING INDEX -- if ring mode is holiday and this
is assigned, an incoming call is routed to the destination
of holiday alternative ring index.
16 01-80, Not Asg none
PGM 166 BTN RANGE DEFAULT
PROVIDE DIAL TONE -- If this feature is set to ON, dial tone
is provided to networking CO.
10: Off
1: On
Off
BLF USAGE -- If this feature is set to ON, flex button LED will
be flashing when CO line is programmed on the button.
20: Off
1: On
On
UNSUP CONF ENTEND -- If this feature is set to ON,
unsupervised conference timer can be extended by dial
feature code after warning tone is heard.
3 0: Disable
1: Enable
Disable
BLOCK IN CLRFWD TMR -- If this feature is set to ON, CO line
is blocked after clear forward waiting time.
40: Off
1: On
Off
PGM 165 BTN RANGE DEFAULT
Release 1.0
November 2010