Technical data

CO Attribute I, II, III - PGM 160-162 A-48
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
CO Attributes II (PGM 161)
CHARGE MODE -- If 'FREE', the external call
though CO line is not printed/saved to SMDR
even though SMDR is enabled.
If 'REPORT', the external call though CO, line
is included to SMDR according to the SMDR
Attributes.
11 0: Free
1: Report
Report
METERING TYPE -- According to PSTN
service type, metering type can be selected
among 00-12 to manage call charge. 01-06
can be applied to LCO lines, 07-12 can be
applied to ISDN lines.
12 00: None
01: 12KHz
02: 16KHz
03: 50KHz
04: SPR
05: PPR
06: NPR
07: AOC 0(Standard)
08: AOC 1 (Italy & Spain)
09: AOC 2 (Finland)
10: AOC 3 (Australia)
11: AOC 4 (Belgium)
12: AOC 5 (Netherlands)
None
PGM 161 BTN RANGE DEFAULT
CO SERVICE MODE -- Determines if SIP/PRI, H.323/BRI
or Qsig is selected for each VOIP(or ISDN) lines.
1 1: SIP/PRI
2: H.323
3: Qsig
4: T1 PRI
5: T1 Qsig
SIP/PRI
DROP TYPE -- LCO line drop type. 2 0:Loop
1:Polarity Reverse
Loop
FLASH TYPE -- LCO line Flash type. 3 0:Loop
1:Ground
Loop
FLASH TMR -- CO Flash Timer. 4 001-300 050
OPEN LOOP TMR -- Open Loop Timer. 5 00-20
(100ms base)
00
PGM 160 BTN RANGE DEFAULT
Release 1.0
November 2010