Technical data

Command Group Access (PGM 152) A-46
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Command Group Access (PGM 152)
Each Digital Phone can be enabled for Command Group access. If enabled, a station can make
a command conference call.
1. Press the [PGM] button and dial 152.
2. Use the dial pad to enter a station range (Ex. 100-110). For a single station, enter the
same number twice.
3. The first 10 Flex button LEDs indicate assigned command call group. Press the desired
Flex button to toggle command call group assignments
LED ON: station use command call group
LED OFF: station does not use command call group
4. Press the [SAVE] button to store the Command group data.
CO LINE DATA - PGM 160-181
CO Attribute I, II, III - PGM 160-162
CO Attributes define various characteristics of the CO lines under control of the system.
1. Press the [PGM] button and dial:
160 for CO/IP Attributes I
161 for CO/IP Attributes II
162 for CO/IP Attributes III.
2. Use the dial pad to enter a CO Line range. For a single CO Line, enter the same number
twice. For MBX IP-100, acceptable range is 01-80, for MBX IP-300, the acceptable range
is 001-240.
3. Press Flex button to access desired menu. Refer to PGM 160-162 tables below for each
attribute.
4. Use the dial pad to change the value.
5. Press the [SAVE] button to store the changed data.
Release 1.0
November 2010