Technical data

CO/IP Group Access (PGM 150) A-45
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
CO/IP Group Access (PGM 150)
Stations can be allowed or denied access to CO Lines and IP Channels by group, refer to CO
Line Attributes, PGM CODE 160, button 2/3. As a default, all stations are allowed access to
CO/IP group 1.
1. Press the [PGM] button and dial 150.
2. Use the dial pad to enter a station range (Ex. 100-110). For a single station, enter the
same number twice.
3. Press desired Flex button number (1-3),
Flex 1: to access for CO line 1 to 24
Flex 2: to access for CO line 25 to 48
Flex 3: to access for CO line 49 to 72
4. Press the desired Flex button to toggle CO/IP Group access, LED on: group access
allowed, LED off: group access not allowed.
5. Press the [SAVE] button to store the data entry.
Internal Page Group Access (PGM 151)
Each Digital Phone can be enabled internal page group access, allowing Stations the ability to
make announcements to each Internal Page Group.
1. Press the [PGM] button and dial 151.
2. Use the dial pad to enter a station range (Ex. 100-110). For a single station, enter the
same number twice.
3. Press desired Flex button number (1-2),
Flex 1: to access for page zone 1 to 24
Flex 2: to access for page zone 25 to 30
4. Press the desired Flex button to toggle Internal Page Zone assignments.
LED ON: station makes announcement.
LED OFF: station does not make announcement.
5. Press the [SAVE] button to store the Page Zone data.
MOBILE SERVICE CLI 4 -- CLI 4for Mobile Service. 11 Max 24 digits -
MOBILE SERVICE CLI 5 -- CLI 5for Mobile Service. 12 Max 24 digits -
PGM 146 BTN RANGE DEFAULT
Release 1.0
November 2010