Technical data

Station Mobile Phone Attribute (PGM 146) A-44
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Station Mobile Phone Attribute (PGM 146)
A mobile phone can be used in conjunction with a Digital Phone. The Mobile phone can access
system resources available to the user's wired phone and will receive incoming calls. The user
may be allowed to enable up to 2 Mobile extensions. Mobile phones are registered to a station
using mobile phone number and mobile phone's CLI.
1. Press the [PGM] button and dial 146.
2. Use the dial pad to enter a station range (Ex. 100-110). For a single station, enter the
same number twice.
3. Use the dial pad to enter mobile phone's index (1-2) which may be registered to a station.
4. Press desired Flex button number (1-3):
• Flex 1: enable mobile extension ability
• Flex 2: mobile extension number
• Flex 3: mobile extension CLI
5. Use the dial pad 1 (ON) or 0 (OFF) to enable mobile extension ability
6. Use the dial pad to enter a mobile extension number
7. Use the dial pad to enter a mobile extension CLI
8. Press the [SAVE] button to store the data entry.
PGM 146 BTN RANGE DEFAULT
MOBILE EXT 1 ENABLE -- Enables mobile extension
ability.
1 0: Off
1: On
Off
MOBILE EXT 1 NUMBER -- Mobile extension number. 2 Max 24 digits -
MOBILE EXT 1 CLI -- Mobile extension CLI number. 3 Max 24 digits -
MOBILE EXT 2 ENABLE -- Enables Second mobile
extension ability.
4 0: Off
1: On
Off
MOBILE EXT 2 NUMBER -- Second Mobile extension
number.
5 Max 24 digits -
MOBILE EXT 2 CLI -- Second Mobile extension CLI
number.
6 Max 24 digits -
MOBILE SERVICE MODE -- Select Mobile Service Mode. 7 0: All Call
1: Service CLI Only
All Call
MOBILE SERVICE CLI 1 -- CLI 1 for Mobile Service. 8 Max 24 digits -
MOBILE SERVICE CLI 2 -- CLI 2for Mobile Service. 9 Max 24 digits -
MOBILE SERVICE CLI 3 -- CLI 3for Mobile Service. 10 Max 24 digits -
Release 1.0
November 2010