Technical data

Station Call Forward (PGM 143) A-42
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Station Call Forward (PGM 143)
1. Press the [PGM] button and dial 143.
2. Use the dial pad to enter a station range (Ex. 100-110). For a single station, enter the
same number twice.
3. Press desired Flex button number (1-4),
Flex 1: Forward Type
Flex 2: Forward Number
Flex 3: Forward Apply Time
Flex 4: Call Forward No Answer Timer
Flex 5: Forward Display
4. Use the dial pad to enter desired data for the Attribute, refer to the following Table.
5. Press the [SAVE] button to store the data entry.
PGM 143 BTN RANGE DEFAULT
FORWARD TYPE -- Specify call forward type . 1 0:Not Assigned
1:Unconditional
2:Busy
3:No Answer
4:Busy or No Answer
Not
Assigned
FORWARD NUMBER -- Specify Call Forward Destination
by entering dial digits.
2 Max 32 digits -
FORWARD APPLY TIME -- Specify Call Forward Applying
Time .
30:All
1:Day
2:Night
3:Timed
All
CFW NO ANS TMR -- Busy or No Answer - employs this
'CFW NO ANS TMR' timer. If the station does not respond
during the 'CFW NO ANS TMR' timer. Call is forwarded to
'Call Forward Destination'.
4 0-600 secs 15 secs
FORWARD DISPLAY -- Enables the Forward Display
Option to check forward information in idle state.
50:Off
1:On
On
Release 1.0
November 2010