Technical data

Station Auto Attributes (PGM 138) A-40
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Station Auto Attributes (PGM 138)
When a station goes to an off-hook condition (lifts handset or presses [SPEAKER] button), the
system normally provides an intercom dial tone. In place of the dial tone, the station can be
programmed to dial the preprogrammed (max 16) digits. This programmed digit id called
Auto-Dial-Digit. If the Auto-Dial-Digit is configured and if no digit within 'auto dial pause time' is
pressed, then the system dials the 'Auto-Dial-Digit' automatically.
1. Press the [PGM] button and dial 138.
2. Use the dial pad to enter a station range (Ex. 100-110). For a single station, enter the
same number twice.
3. Press desired Flex button number (1-2),
- Flex 1: Auto Dial Digit
- Flex 2: Auto Dial Pause Time
4. Use the dial pad to enter the desired auto dial digit. Max 16 digits available.
5. Use the dial pad to enter the auto dial pause time. 0 to 30 sec available
6. Press the [SAVE] button to store the data entry.
PGM 138 BTN RANGE DEFAULT
AUTO DIAL DGT -- Digits will be dialed automatically. 1 Max 16 digits -
AUTO DIAL PAUSE TIME -- Auto dial pause time. 2 00-30 0
Release 1.0
November 2010