Technical data

Station Number Attributes - PGM 131-135 A-37
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Station CLI Attributes (PGM 135)
PGM 135 BTN RANGE DEFAULT
CLIP DISPLAY -- Calling Line Identification Presentation
(CLIP), an ISDN service, sends the number of the calling
party to the system in the call SETUP message. If enabled,
the number will be shown in the Digital phone LCD.
1 0:Off
1:On
On
COLP DISPLAY -- COLP (Connected Line Id
Presentation), an ISDN service, sends the number of the
answering party to the system in the call CONNECT
message. If enabled, the number will be shown in the
Digital Phone LCD.
2 0:Off
1:On
Off
CLI/REDIRECT -- When an incoming ISDN call is
redirected, the call SETUP message will contain an original
and redirected CLI. This selection determines if the Digital
Phone will display the original or redirected CLI number.
30:CLI
1:Redirect
CLI
CLIR WHEN OUTGOING -- CLIR (Calling Line
Identification Restriction) an ISDN service, removes calling
party ID sent from the PSTN to the called party with a
RESTRICT instruction in the SETUP message. If enabled
here, the system will send the RESTRICT instruction to the
PSTN when an outgoing ISDN call is placed.
4 0:Off
1:On
Off
COLR WHEN ANSWER -- COLR (Connected Line Id
Restriction) an ISDN service, removes connected party ID
sent from the PSTN to the calling party with a RESTRICT
instruction in the CONNECT message. If enabled here,
the system will send the restrict instruction to the PSTN
when the station answers an ISDN call.
5 0:Off
1:On
Off
CLI NUMBER -- When not restricted (FLEX 4 & 5 above),
this entry is added to the number sent in the ISDN call
SETUP or CONNECT message in place of the station
number.
6 24 digits -
CFWD CLI/REDIRECT -- When an incoming ISDN call is
forwarded by the ISDN, the call SETUP message will
contain an original and redirected CLI. This selection
determines if the Digital Phone will display the original or
redirected number.
70:CLI
1:Redirect
CLI
IGNORE CALLER CLIR -- When receive a call with CLIR
option, ignore the option and display CID.
8 0:Off
1:On
Off
Release 1.0
November 2010