Technical data

Station Number Attributes - PGM 131-135 A-34
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Station Number Attributes II (PGM 132)
HOTDESK AGENT NUMBER -- sets wake-up time. 8 0: Off
1: On
Off
TIME TABLE INDEX -- enables daily repeating alarm. 9 1-9 None none
PGM 132 BTN RANGE DEFAULT
FORCED HANDSFREE ACCESS -- when placing an
intercom call, a user can change the ICM signaling mode,
Tone Ring to Hands free answer mode or Hands free answer
to Tone Ring mode.
10: Disable
1: Enable
Disable
FORWARD ACCESS -- enables Call Forward to be activated
by the station.
20: Disable
1: Enable
Enable
OFFNET FORWARD ACCESS -- a station must be allowed
Off Net Fwd to forward external incoming calls outside the
system or otherwise establish a CO-to-CO connection.
30: Disable
1: Enable
Enable
DND ACCESS -- enables DND to be activated by the station. 4 0: Disable
1: Enable
Enable
INTRUSION ACCESS -- enables intrusion to gain access to
an active call.
50: Disable
1: Enable
Disable
MOBILE EXT ACCESS -- enables mobile extension ability. 6 0: Disable
1: Enable
Enable
HOOK FLASH MODE -- determine the operation when SLT
user press hook-flash button during conversation. 0. FLASH
NORMAL: Hook Flash can be detected. In addition, it will be
operated normal case flow. 1. FLASH IGNORE: Hook Flash
cannot be detected. All of hook flash will be ignored at any
time. 2. FLASH DROP: When Hook Flash is detected, the line
will be disconnected. 3. HOLD RELEASE: Drop the holding
line if system detects Hook Flash and then On-Hook during
dialing state.
7 0: Flash Normal
1: Flash Ignore
2: Flash Drop
3: Hold Release
Flash Normal
AUTO PICKUP -- if a group member is ringing, another
member of the Group can Pick-Up a call ringing at another
member by simply going “Off-hook”.
80: Disable
1: Enable
Disable
PGM 131 BTN RANGE DEFAULT
Release 1.0
November 2010