Technical data

Station Flexible Button Assignment (PGM 126) A-31
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
For Station Number (DN) Button:
Using dial pad, enter the Station number you want to assign.
Press the [SAVE] button to store the data entries.
If the same station number already exists on another flex button, an error tone is heard.
For Dialed Number Button:
Using dial pad, enter desired number you want to assign.
Press the [SAVE] button to store the data entered.
Flex Button 2 -- to configure ring option:
The ring option is only valid at Station Number-type Flex button.
To configure ring option, use dial pad or DELETE/SPEED button.
Press the [SAVE] button to store the data entries.
Flex Button 3 -- to configure access mode:
Access mode follows Flex button type.
- If Flex button type is "Fixed" or "Dialed Number", select 0 or 1.
• 0. Changeable: the station user can change this button data.
• 1. Unchangeable: can only be changed in Admin Programming.
- If Flex button type is "Station Number" then select 0-2.
• 0. All Call: there is no restriction.
• 1. Seize and Dial : Unable to seize only by off-hook when making outgoing call
even if the button is set to prime number button.
• 2. Incoming only: Unable to make an outgoing call using this button. Only
answering incoming call is allowed.
Press the [SAVE] button to store the data entries.
0: immediate ring 6: delay 18 sec
1: delay 3 sec 7: delay 21 sec
2: delay 6 sec 8: delay 24 sec
3: delay 9 sec 9: delay 27 sec
4: delay 12 sec .. : no ring
5: delay 15 sec
Release 1.0
November 2010