Technical data

Station Flexible Button Assignment (PGM 126) A-30
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Station Flexible Button Assignment (PGM 126)
Flex buttons for each Digital Phone and DSS Console can be assigned a function (Type) and
an associated Value.
For assignments to a DSS Console, enter the DSS console station number and enter the
desired button number. For Serial DSS, the button numbers are decided by the order of Serial
DSS. The button number starts from 49 at the first Serial DSS, 97 at the 2nd Serial DSS, 48 is
added to the button number when desired Serial DSS order is increased. Each console
contains entries for up to 48 buttons even though the console may only have 12 buttons. In this
case, assignments for buttons 13 to 48 are ignored.
1. Press the [PGM] button and dial 126.
2. Use the dial pad to enter a station range (Ex. 100-110). For a single station, enter the
same number twice.
3. Dial the desired Flex button number (001-240)
4. Press the desired Flex button (1-3).
- Flex button 1: to configure button type
- Flex button 2: to configure ring option
- Flex button 3: to configure access mode
For Flex Button 1:
To configure button type, use the dial pad to select button type 1-3.
- Type 1: to assign Fixed type button to Flex button.
- Type 2: to assign Station Number(DN) to Flex button.
- Type 3: to assign "Dialed Number" to Flex button.
For Fixed Button:
Use the dial pad to select one of the following:
Press the [SAVE] button to store the data entered.
If a station already has the same fixed type button, an error tone is heard and the data is
not saved.
1: redial 6: button
2: speed 7: transfer
3: conference 8: recall
4: mute 9: PTT
5: call back
Release 1.0
November 2010