Technical data

Station Port Attributes (PGM 121-124) A-27
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Station Attributes III (PGM 123)
IP-8000 LCD BRIGHTTNESS -- IP 8000 Series terminal
can adjust LCD brightness for user’s convenience.
6 01-15 07
GROUP QUEUE DISPLAY -- if this is set to ON, system
provides station goup Queue information to group
member.
7 0: Off
1: On
Off
ENTRY LANGUAGE ENTRY LANGUAGE ENTRY LANGUAGE
00 English 05 Danish 10 Portuguese
01 Italian 06 Norwegian 11 Spanish
02 Finnish 07 Hebrew 12 Korean
03 Dutch 08 German 13 Estonian
04 Swedish 09 French 14 Russian
PGM 123 BTN RANGE DEFAULT
PRIME NUMBER BTN -- among My-DN and several Sub-DNs
which are assigned to station flex buttons, determines the
first-seized DN when the user initiates a call. If prime button is not
set of invalid, the system scans sequentially from flexible button 1
to flexible Button 48 and take the unused and valid flexible button
as prime button NOTE: DN buttons of associated DSS box cannot
be a prime number button.
1 01-48 01
ZONE NO -- this menu represents a station belonging to what zone. 2 1-9 1
AUTO HOLD -- enables Auto Hold for the station. With Auto Hold
enabled, the system will place an active external call on hold if the
user presses a CO/IP or DSS button.
3 0: Off
1: On
Off
ENBLOCK DIAL -- when On, the user-dialed digits are stored at the
Digital Phone until explicitly sent by the user. When sent, all dialed
digits are sent to the system in a block. Enblock mode is only
available to Digital Phones with soft keys.
4 0: Off
1: On
Off
PGM 122 BTN RANGE DEFAULT
Release 1.0
November 2010