Technical data

STATION DATA - PGM Codes 120-152 A-24
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
STATION DATA - PGM Codes 120-152
Station Type (PGM 120)
Each station has its own station type according to its terminal type. This station type is used by
the system to recognize the station’s capabilities. In addition, this station type defines DSS/BLF
consoles, which can be connected to a station. Maximum 5 DSS/BLF consoles can be
connected to a station. Especially, in IP-8000 Series, maximum 4 serial DSS/BLF consoles can
be connected. For DSS/BLF consoles, the associated father station number is displayed.
To set the terminal type:
1. Press the [PGM] button and dial 120.
2. Use the dial pad to enter a station number.
3. Select the desired Flex button:
- FLEX 1: to display current station type or to set SLT station type (DTMF normal,
DTMF MSG-wait, PULSE normal, PULSE MSG-wait)
- FLEX 2: to connect DSS/BLF consoles to a station or to display father station number
of a DSS/BLF console
- FLEX 3: to restart IP-Phone
4. For Flex button 1 (TYPE), to view station type.
- Only for SLT station, station’s type can be modified. To modify SLT station type, use
the dial pad button 1 to 4 (1: DTMF Normal, 2: DTMF Msg-wait, 3: Pulse Normal, 4:
Pulse Msg-Wait).
- Press the [SAVE] button to store the data entries.
5. For Flex button 2, there are 3 different modes available.
- Mode (1): For Key-phone which can have 5 DSS/BLF consoles .
- Mode (2): For IP-8000 series which can have 4 serial DSS/BLF consoles.
- Mode (3): For DSS/BLF console.
6. Mode (1): For Phone, which can have 5 DSS/BLF consoles. To assign DSS/BLF Console
to DSS map index.
- Select Flex button (1-5) for DSS map Index (1-5) and enter DSS/BLF Console’s
station number.
- Press the [SAVE] button to store the data entries.
Release 1.0
November 2010