Technical data

NUMBERING PLAN DATA - PGM Codes 110 to 116 A-16
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
NUMBERING PLAN DATA - PGM Codes 110 to 116
Numbering Plan Type (PGM 110)
The MBX IP system provides default Numbering plan set. One of any numbering plans can be
installed or every numbering plan can be cleared.
If numbering plan type 7 is selected, all numbering codes are deleted. After deleting, the user
should then assign the ‘System Numbering Plan (PGM 111)’. After configuring the System
Numbering Plan, the user can assign the other numbering plan code. This is useful when the
user wants to reconfigure all the numbering codes without default values.
1. Press the [PGM] button and dial 110.
2. Press Flex Btn 1 and select one of the default numbering plans.
If numbering plan type 7 is selected, all numbering codes are deleted. After deleting, the
user should first assign the prefix numbering plan. After configuring the prefix, the user
can assign the others like station number, CO Group Access Code, Extra Numbering and
Feature Code. This is useful when a user wants to reconfigure all numbering codes.
3. Press the [SAVE] button to update all numbering plan codes with selected default value.
System Numbering Plan (PGM 111)
To assign a numbering plan code, the type should be matched with one of the System
Numbering Plans provided, which consists of a Prefix and More digits.
• Prefix -- leading preceding digits of some numbering plan code (up to 8 digits).
• More Digits -- number of digits following the Prefix code (up to 4 digits).
• Master Prefix Digits -- when the System Numbering Plan code consists of more than 4
digits, the preceding digits of the prefix code placed at more than 4 digits from the end
digit (to 3 digits in MBX IP-100, and up to 5 in MBX IP-300 system).
NOTE: System Numbering Plan conflict is not allowed; if there is a Prefix '1' and more
digit 4, then there cannot be other prefix '10' with more digit 4.
1. Press the [PGM] button and dial 111.
2. Enter index and check current prefix code.
Volume Up/ Down key can be used to see next/ previous index data.
To Change Prefix Numbering Plan, delete the data first.
To delete existing Prefix Numbering Plan, press [DELETE] and then press [SAVE].
When Prefix numbering plan is deleted, related numbering plan codes are also cleared.
3. Press Flexible button 1 and enter the prefix code to set a new Prefix code.
4. Press Flexible button 2 and enter More Digits.
Release 1.0
November 2010