Technical data

DTIM/SLTM Registration Table (PGM 107) A-14
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
DTIM/SLTM Registration Table (PGM 107)
1. Press the [PGM] button and dial 107.
2. Enter slot number to be assigned.
3. Press the Flex button (1-5) and enter the desired data
4. Press the [SAVE] button to store.
IP Address Plan (PGM 108)
The System IP is required for external VoIP calls, WEB programming, IP Phone registration or
external VoIP calls.
MBX IP can be installed behind a NAPT server, if the NAPT server provides fixed address
translation and port forwarding to the system. In this case, the system will employ the “Firewall
IP address” as the fixed public IP address for communication with remote devices. This
address must be assigned as the MFIM address in the remote device (IP Phone or Gateway
DTIM/SLTM).
1. Press the [PGM] button and dial 108.
2. Select the desired button 1-9,
3. Enter the desired data (For IP addresses, use an "*" to enter a dot ("."))
4. Press the [SAVE] button to store.
PGM 107 BTN RANGE REMARK
MAC ADDRESS -- Used to register a DTIM to the System, by
entering its MAC Address. (Refer to Alphanumeric Dial Pad entries
on page B-105.)
1- -
STA RANGE (VIEW) -- Once a connection is made to the System, the
Station number assigned to DTIM/SLTM will be displayed.
2- -
IP ADDRESS -- Displays the IP Address of the IP phone/Phontage. 3 - -
F/W IP ADDRESS -- Displays the Firewall IP Address of the IP
phone/Phontage.
4- -
RTP SECURITY -- Enable RTP Security. 5 - -
PGM 108 BTN RANGE REMARK
IP ADDR -- Public IP Address required for remote user and
Web-admin. IPv4 format.
1 - 10.10.10..1
SUBNET MASK -- Used to register a Phonatge to the System, by
entering its User ID and Password.
2 - 255.255.0.0
Release 1.0
November 2010