Technical data

Logical Slot Assignment (PGM 103) A-12
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Logical Slot Assignment (PGM 103)
1. Press the [PGM] button and dial 103.
2. Press the Flex button (1-3) to change slot order.
3. Enter slot numbers.
4. Press the [SAVE] button to store.
NOTE: If the DIP switch of the manual board detection ((the 1st DIP Switch) is ON, the system will detect
the logical slot assign in sequence with increasing order automatically.
If the 1st IP of DIP switch is OFF, the logical slot assignment must be entered at each board type.
After manually setting logical slot assignment, the user should reset the system manually.
DECT/IP Phone/SIP Phone Port Assignment (PGM 104)
1. Press the [PGM] button and dial 104.
2. Press the Flex button (1-3) and enter the desired data
3. Press the [SAVE] button to store.
PGM 103 BTN RANGE REMARK
CO LINE BOARD 1 - -
STATION BOARD 2 88 (SIP Phone)
99 (IP Phone or Phontage)
-
VMIB BOARD 3 - -
PGM 104 BTN RANGE REMARK
MAX NO. OF DECT PHONE -- that can be registered to the System. 1 - 8
MAX NO. OF IP PHONE -- that can be registered to the System. 2 - 32
MAX NO. OF SIP PHONE -- that can be registered to the System. 3 - 32
Release 1.0
November 2010