Technical data

Slot Assignment (PGM 101) A-11
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Slot Assignment (PGM 101)
1. Press the [PGM] button and dial 101.
2. Enter Slot number
3. To change board type, press the Flex button 1 and dial board. Refer to NOTE2 - Board
Type Code.
4. To change device number, press the Flex button 2 and dial device.
5. To store the location data press the [SAVE] button.
Slot Assignment
NOTE: If the DIP switch of the manual board detection (the 1st DIP Switch) is ON, system will detect the
installed board type automatically. If the 1st DIP switch is OFF, the board type code must be
entered at each slot. After manually setting Rack Slot assignment, the user should reset the
system manually.
Board Type Code
PGM 101 BTN RANGE REMARK
SLOT ASSIGNMENT-- refer to "Board Type Code" table below. 1 - -
SLOT 02 -- enter device (port) number. 2 - -
STATION BOARD CODE CO LINE BOARD CODE VMIB BOARD CODE
DSIB
DTIB12
DTIB24
SLIB12
SLIB24
WTIB
DTIM8
SLTM4/8
SLTM32
11
12
13
14
15
16
17
18
19
VOIU
VOIB8
VOIB24
LCOB4
LCOB8
LCOB12
PRIB
31
32
33
34
35
36
37
VMIB
AAIB
VSF
51
52
53
Release 1.0
November 2010