Technical data

PRE-PROGRAMMED DATA - PGM Codes 100 to 108 A-9
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
PRE-PROGRAMMED DATA - PGM Codes 100 to 108
Location Program (PGM 100)
Under Location Program, the country is identified using the international dial codes (COUNTRY
CODE). If the Country code requires changing, the system must be initialized to restructure
memory and create the country specific defaults, gain, frequencies and other system
characteristics specific to the country and regional regulatory requirements.
To change the Country Code:
1. Set the 2nd MPB switch to the ON position,
2. Follow the procedure below to modify the Country code,
3. Reset the system with Power OFF/ON, pressing Reset button, or pressing [PGM] 499 /
Flex 2 [SAVE].
A twenty-four (24) character SITE NAME is also defined in this program. The SITE NAME is
primarily useful for the installer/programmer as a reference to the customer.
1. Press the [PGM] button and dial 100.
2. Select the desired Flex button (1-2), refer to the PGM 100 Table below.
For COUNTRY CODE, refer to the Nation Codes table below for appropriate entries.
3. Use the dial pad to enter desired data. For System Reset, press [PGM] 499 / Flex 2, press
[SAVE] to reset the System to default.
4. To store the location data press the [SAVE] button.
PGM 100 BTN RANGE REMARK
NATION CODE -- enables [SPEAKER] activation when a CO/IP,
DSS or other feature button is pressed (handsfree).
1 4 digits 1
SITE NAME -- selects Speakerphone mode, Headset mode or
Ear Mic Mode.
2 24 characters -
Release 1.0
November 2010