Technical data

Data Entry Mode A-8
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Data Entry Mode
All data entry is accomplished from an Admin Station or station assigned for data entry (Station
Port Attributes I (PGM CODE 121, Flex button 5). After DB initialization, Station 100 (Station
port # 01) may access the system database. In addition, as default, there is no Station Admin
password defined.
To enter the PROGRAM MODE:
1. From the Admin Station press the [PGM] button and then dial * and #.
2. Enter the Admin password. A confirmation tone is heard.
To select a program:
Press the [PGM] button and dial the specified Admin Program Code.
Procedures for Data Entry
The following sections provide specific instructions for entering data from the Admin Station
once in the PROGRAM MODE. Each section provides descriptive information, step-by-step
instructions and Tables for determining appropriate entries.
Release 1.0
November 2010