Technical data

SIP Terminal Registration 9-1
Chapter 9: SIP Phone
MBX IP Description / Operations & Programming Guide
Chapter 9
SIP Phone
SIP Terminal Registration
The System supports the LG-Nortel SIP-based videophone, LVP-2000, as well as other third
party SIP phones. Compatible SIP phones support the Internet Engineering Technical
Committee standard RFC3261 for real-time communications over the Internet. Once
registered, the System will deliver services to the SIP Phone. Operation of the SIP Phone
generally follows the steps outlined for an SLT.
CONDITIONS
- The SIP Phone not supporting standard SIP protocol is not supported.
- Support for 3rd-party SIP phones requires a license.
- The 3rd-party applications supporting standard SIP protocol can be registered.
- The System checks the SIP status periodically; if the System does not receive the
‘REGISTER’ message from the SIP Phone in Registration Time, the SIP Phone
registration attempt is cancelled.
- A VOIB channel is needed for the SIP Phone to Place or Receive Calls.
OPERATION
Web Admin
To register a SIP Phone:
1. Select IP Phone Registration Table.
2. Enter the Auth ID, Password, and User ID of SIP Phone.
3. Click the Save button.
SIP Phone
1. Configure SIP Phone settings (ex. IP address, Subnet mask, Gateway, Telephone
number, Proxy Address, Expiration Timer, etc.); the Telephone is the Station number
to be assigned to Phone by System and the Proxy Address is the System MPB IP
address.
2. Boot the SIP Phone, which will activate registration with the System.
Release 1.0
November 2010