Technical data

Hook-Flash Mode 8-3
Chapter 8: Single Line Telephone
MBX IP Description / Operations & Programming Guide
Hook-Flash Mode
To prohibit any service after Hook-Flash, SLT Hook-Flash can be disabled, dropped, or ignored.
• Disable Mode – When Hook-Flash detected, the previous Line will be continued, and
the Line is not Dropped.
• Flash Drop – When Hook-Flash Flash detected, previous conversation will be
disconnected.
• Flash Ignore – All Hook-Flash is ignored.
• Hold Release – During the conversation when a SLT user hook-flashes, the previous
line is placed on hold; if the SLT user hangs-up without being transferred, the previous
line will be disconnected automatically.
PROGRAMMING
Station Data
Hook Flash Mode (PGM 132 FLEX 7) … see page A-34
HARDWARE
SLT
PGM 124 BTN RANGE DEFAULT
HOOK FLASH MODE -- determine the operation when
SLT user press hook-flash button during conversation. 0.
FLASH NORMAL: Hook Flash can be detected. In
addition, it will be operated normal case flow. 1. FLASH
IGNORE: Hook Flash cannot be detected. All of hook
flash will be ignored at any time. 2. FLASH DROP: When
Hook Flash is detected, the line will be disconnected. 3.
HOLD RELEASE: Drop the holding line if system detects
Hook Flash and then On-Hook during dialing state.
7 0: Flash Normal
1: Flash Ignore
2: Flash Drop
3: Hold Release
Flash Normal
Release 1.0
November 2010