Technical data

Broker Call 8-2
Chapter 8: Single Line Telephone
MBX IP Description / Operations & Programming Guide
OPERATION
SLT
To activate a Transfer Broker Call:
1. While on an active Call, press the Hook-Switch to receive the Intercom Dial tone; the
active Call is placed on Exclusive Hold.
2. Place a second Call.
3. To alternate between calls, shortly press the Hook-Switch.
To activate a Call Wait Broker Call:
1. While on an Active Call, and an Incoming Call-Wait is received, press the Hook-Switch
to answer the incoming Call.
2. To alternate between Calls, shortly press the Hook-Switch.
PROGRAMMING
Station Data
Hook Flash option when transfer (PGM 124 FLEX 6) … see details on page A-28
RELATED FEATURE
Call Transfer … see page 3-30
PGM 124 BTN RANGE DEFAULT
HOOK FLASH WHEN TRANSFER -- Determine the
operation when user press hook-flash button while
transferring call.
0. Cancel transfer : drop current call and recover
previous call 1. Broker : hold current call and recover
previous held call 2. Conference: establish 3-way
conference call. 3.Broker-Conf : Operated Broker
and Conference when a user hook flash within 2 sec
6 0: Cancel Transfer
1: Broker
2: Conference
3: Broker-Conf
Cancel Transfer
Release 1.0
November 2010