Technical data

DSS/DLS Consoles 7-40
Chapter 7: Attendants
MBX IP Description / Operations & Programming Guide
Tenant Time Table Index (PGM 280) … see details on page A-131
RELATED FEATURES
System Clock Set… see page 7-42
Loud Bell Control (LBC)… see page 3-115
Dialing Restrictions… see page 3-63
Auto Service Mode Control … see page 3-10
DSS/DLS Consoles
The System allows an unlimited number of DSS/DLS Consoles to be installed in the System.
Up to 5 DSS/DLS Consoles may be associated with a Station connected to a System. Each
button on the Console can be assigned as CO Line, Intercom, or Feature key.
The User or Administrator may then change individual Flex buttons as desired. Operation of
the DSS/BLF Console Flex buttons is the same as Flex buttons on the Digital Phone.
CONDITIONS
- Each DSS/DLS Console is assigned to operate in connection with a specific Station.
- There is no limit to the number of DSS/DLS units in a System beyond the basic
System capacities.
PGM 280 BTN RANGE DEFAULT
TENANT NAME -- Determines the name of Tenant. 1 Max 24 -
TENANT NAME DISPLAY -- Determines the Tenant name to display. 2 0: Off
1: On
0: Off
TIME TABLE INDEX -- Determines Time Table index of tenant group. 3 1-9 1
ACNR RETRY COUNT -- Determines the ACNR retry count. 4 0-5 3
WAKE UP RETRY COUNT -- Determines the Wake Up retry count. 5 0-5 3
WAKE UP RETRY TIME -- Determines the Wake Up retry time (min). 6 00-20 01
AUTH RETRY COUNT -- Determines the AUTH retry count.
(Reserved)
70-5 3
MULTI-CALL FORWARD SVC COUNT -- determines the Multi-Call
forward count.
8 01-10 05
Release 1.0
November 2010