Technical data

Day/Night/Timed Ring Mode 7-37
Chapter 7: Attendants
MBX IP Description / Operations & Programming Guide
Day/Night/Timed Ring Mode
The System Clock automatically controls Ring Mode; Ring assignments are applied based on
the Time of Day and Day of Week. Three modes of ring (Ring Assignments) are provided: Day,
Night and Timed.
The Attendant controls the System Ring Service mode changing from Auto Service Mode to
Day, Night or Timed Service mode. Based on the Service Mode selected, different Ring
Assignments, COS and Answering Privileges are invoked for System Users.
CONDITIONS
- Only Attendants can change Day/Timed/Night Ring Mode for the System manually
and program the Auto Ring Mode Selection Table.
- A Station can receive Incoming Calls for CO Lines based on the Database
assignments and the System mode (Day/Night/Timed) when the Call arrives.
- When the Auto Ring Selection Table is programmed, Ringing, COS and CO/IP Access
mode are changed automatically based on Times assigned in the Table.
- The Attendant always has manual control of System mode by Enabling/Disabling the
Auto Service Mode Control.
OPERATION
Attendant
To modify Day/Timed/Night Ring Mode manually (Attendant Only):
1. Press the [PGM] button.
2. Dial 0 8 1 {Day/Night Program code}.
3. Select Tenant Number (0=All, or 1-9).
4. Select Ring mode (0=AUTO, 1=DAY, 2:=NIGHT, 3=TIMED).
OR
1. Dial the {Day/Night Program Feature Code}.
2. Select Tenant Number (0=All, or 1-9).
3. Select Ring mode (0=AUTO, 1=DAY, 2:=NIGHT, 3=TIMED).
To set Day/Timed/Night Ring Mode automatically (Auto Service Mode Control):
1. Press the [PGM] button.
2. Dial 0 8 1 {Day/Night Program code}.
3. Select Tenant Number (0=All, or 1-9).
4. Select Auto Ring mode (0=AUTO).
Release 1.0
November 2010