Technical data

Call Forward, Pilot Hunt 3-19
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Tenant Data
Multi-Call Forward Service Center … see page A-131
RELATED FEATURES
Station Authorization Code … see page 3-5
DND … see page 3-76
Dialing Restriction … see page 3-63
Station Group … see page 3-150
Intercom Signaling Mode … see page 6-11
Call Forward, Preset … see page 3-22
Call Forward, Pilot Hunt
User may have selected incoming calls in his group to re-route to other stations (local or
networked), station groups, or VMIIB. The user selects the type and condition under which calls
will forward by entering a Call Forward code as follows:
Code 1, Unconditional – all calls to the station, except recalls, are forwarded internally or
externally immediately upon receipt.
Code 2, Busy – if the station is busy, forwards all calls, except recalls, to the selected
station.
Code 3, No Answer – forwards all calls, except recalls, to the selected station when the
station does not answer within the No Answer timer.
Code 4, Busy/No Answer – forwards calls if the selected station is busy or does not
answer within the No Answer timer.
CONDITIONS
- Station Call Forward has higher priority than Pilot Hunt Call Forward.
- To assign Pilot Hunt Call forward, the Station should be a member of the Pilot Hunt
Group.
- An external number cannot be assigned to a Pilot Hunt Forward destination.
- If a station assigns the pilot hunt Call Forward, the pilot hunt call forward in day mode
is changed.
PGM 280 BTN RANGE DEFAULT
MULTI-CALL FORWARD SERVICE COUNTER -- determines the
Multi-Call forward count.
8 01-10 05
Release 1.0
November 2010