Technical data

Answering Machine Emulation (AME) 6-31
Chapter 6: Digital Phone
MBX IP Description / Operations & Programming Guide
Answering Machine Emulation (AME)
When internal or external calls are forwarded to VMIB, the user can check and hear saved
messages and also can record the call, using the {Mute} button. AME feature has LED Blinking
mode and Speaker Hearing mode. The User can program an {AME} button to a flex button
which will allow them to assign AME mode with this button.
• LED Blinking Mode — When a call is forwarded to VMIB, the {AME} LED button will
blink as notification; the user can hear saved voice conversations by pressing the
{AME} button.
• Speaker Hearing Mode — When a call is forwarded to VMIB, the speaker
automatically will be open to hear the calling party. The user can listen to the call, save
it, or pick-up the call by pressing the {AME} button or {Mute} button.
NOTE: If user presses the {AME} button, the call will be connected without saving the message being
left. If user presses the {Mute} button, the conversation will start and it will be saved at the same
time.
CONDITIONS
- VMIB Access feature has to be ON (enabled)
- AME Function will be start when VMIB Forward feature is set.
OPERATION
Digital Phone
To assign a flexible button as {AME }:
Press [PGM] + {FLEX} + Button Feature Type(1) + {AME Access Feature Code} + [SAVE]
To assign LED Blinking Mode:
Press the {AME} button. 2. Press 1 (LED Blinking Mode).
To assign Speaker Hearing Mode:
Press the {AME} button. 2. Press 2 (Speaker Hearing Mode)
To Delete AME Feature:
1. Press the {AME} button.
2. Press 0 (Disable)
To Answer a call in LED Blinking Mode:
Release 1.0
November 2010