Technical data

Call Forward 3-18
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
ADMIN PROGRAMMING
Station Data
Call Forward Access (PGM 132 FLEX 2) … see details on page A-34
OffNet Call Forward Access (PGM 132 FLEX 3) … see details on page A-34
Call Forward Assignment (PGM 143) … see details on page A-42
PGM 132 BTN RANGE DEFAULT
CALL FORWARD ACCESS -- enables Call Forward to be activated
by the station.
20: Disable
1: Enable
Enable
PGM 132 BTN RANGE DEFAULT
OFFNET CALL FORWARD ACCESS -- a station must be allowed Off
Net Fwd to forward external incoming calls outside the system or
otherwise establish a CO-to-CO connection.
30: Disable
1: Enable
Enable
PGM 143 BTN RANGE DEFAULT
FORWARD TYPE -- specify call forward type. 1 0: Not Assigned
1: Unconditional
2: Busy
3: No Answer
4: Busy or No Answer
Not Assigned
FORWARD NUMBER -- specify Call Forward
Destination by entering dial digits.
2 Max 32 digits -
FORWARD APPLY TIME -- specify Call Forward
Applying Time.
3 0: All
1: Day
2: Night
3: Timed
All
CALL FORWARD NO ANSWER TIMER -- if the station
does not respond during the ‘CFW NO ANS TMR’ timer,
the call is forwarded to Call Forward Destination.
4 ( 0-600) sec 15 sec
FORWARD DISPLAY -- enables the Forward Display
Option to check forward information in idle state.
50: Off
1: On
On
Release 1.0
November 2010