Technical data

Speakerphone 6-20
Chapter 6: Digital Phone
MBX IP Description / Operations & Programming Guide
- Each Digital Phone equipped with Speakerphone is allowed/denied Speakerphone
operation based on System Database Admin. Programming.
- When Headset operation is assigned for the Station, the Speakerphone is disabled
and the [SPEAKER] button activates the Headset audio path instead of the Speaker.
OPERATION
Digital Phone
To activate the Speakerphone:
While on a Call or when placing a Call, press the [SPEAKER] button; the LED will
illuminate.
To switch from Handset to Speakerphone:
1. While on a Call, press the [SPEAKER] button; the LED will illuminate.
2. Replace Handset, the Speakerphone is activated.
To terminate a Speakerphone call:
While on a Call using the Speakerphone, press the [SPEAKER] button; the LED will
extinguish.
PROGRAMMING
Station Data
Headset Ring (PGM 121 - FLEX 3) … see page A-25
Headset Mode (PGM 121 - FLEX 2) … see page A-25
PGM 121 BTN RANGE DEFAULT
HEADSET RING -- in Headset mode, this item
selects device to receive incoming ring signals. -
Speaker, Headset or Both.
3 0:Speaker
1:Headset
2:Both
Speaker
PGM 121 BTN RANGE DEFAULT
HEADSET MODE -- selects Speakerphone mode,
Headset mode or Ear Mic Mode.
2 0:Speaker
1:Headset
2:E-MIC
Speaker
Release 1.0
November 2010