Technical data

Speakerphone 6-19
Chapter 6: Digital Phone
MBX IP Description / Operations & Programming Guide
- Manually dialing a Flash during a CO call will cause only those digits after the Flash to
be stored and re-dialed as the SNR.
OPERATION
Digital Phone
To save a Dialed number, while on a CO/IP Call:
After dialing, but before hanging up, press the [SPEED] button twice; the dialed number
will be stored in the SNR buffer.
To dial a Saved number:
1. Lift the handset or press the [SPEAKER] button.
2. Press the [SPEED] button.
3. Dial #.
RELATED FEATURES
Station Speed Dial … see page 3-143
System Speed Dial … see page 3-146
Last Number Redial (LNR) … see page 3-109
HARDWARE
Digital Phone
Speakerphone
Digital Phones equipped with a Speakerphone can use the telephone hands-free in two-way
conversations.
CONDITIONS
- If Automatic Speaker Select is enabled at the Station, pressing a DSS, DN, CO Line
Access Code or Speed Dial button will automatically activate the Speakerphone.
- The [MUTE] button LED indicates the status of the Microphone, when lit the
Microphone is inactive.
- When Group Listen is enabled, pressing the [SPEAKER] button while using the
handset will send audio to both the Handset and Speaker. However, only the Handset
microphone will be active; in order to activate the Speakerphone Microphone, the
Handset must be On-Hook.
Release 1.0
November 2010