Technical data

Saved Number Redial (SNR) 6-18
Chapter 6: Digital Phone
MBX IP Description / Operations & Programming Guide
OPERATION
MBX IP Phone
To download a Ring Tone from System memory:
1. Press the [PGM] button.
2. Dial 23 {Ring Tone Download code}.
3. Select the desired Ring tone location (5-8).
4. Select the Ring source using the [VOL UP]/[VOL DOWN] keys and press the
[SELECT] button or dial the appropriate ring number to select.
5. While listening to music, - Dial 1 to save the selected music source - Dial 2 to return
previous step.
To select the downloaded Ring Tone:
1. Press the [PGM] button.
2. Dial 21 (Intercom Ring tones), or 22 (CO/IP Ring tones).
3. Press the [OK] soft button or fixed button.
4. Dial the desired Ring tone digit (5-8). 5. Press the [SAVE] button.
RELATED FEATURES
Differential Ring … see page 3-72
Saved Number Redial (SNR)
The Last Dialed number on a CO/IP Call may be stored (up to 24 digits) in a buffer for future
Redial. This number is saved in memory until the User stores a new number. Numbers dialed
for subsequent calls do not affect the Save Number Redial (SNR) buffer.
CONDITIONS
- The SNR can be a maximum of 24 digits.
- Dialing the Saved Number will automatically seize the CO/IP line that was used for the
original call; if the CO/IP Line is Busy, a CO/IP Line from the same group will be
selected and the saved number dialed. If all CO/IP lines from the group are busy, the
user will receive All Lines Busy tone and may select to Queue the call.
- Dialing the SNR will automatically seize the DN that was used for the original call. If
the DN is used by another Station, automatically Prime DN will be selected and saved.
- SNR is saved in permanent memory, protected from power failure.
Release 1.0
November 2010