Technical data

Prime Line Immediately/Delayed 6-16
Chapter 6: Digital Phone
MBX IP Description / Operations & Programming Guide
Prime Line Immediately/Delayed
When a User Station goes Off-Hook, the System normally provides the ICM dial tone. If
desired, a Station can be assigned to access a pre-selected Prime Line. The Prime Line can
be set for:
• Seizing a CO/IP Line
• Calling another Station
• Feature Code (as selected)
Prime Line access can be defined as:
• Immediate – When phone goes Off-Hook, the System will provide access to the Prime
Line.
• Delayed – The Station User will receive the normal Intercom Dial tone for the
designated Prime Line Delay Timer and will access the Prime Line following Timer
expiration.
CONDITIONS
- Prime Line is based on DN.
- When the User lifts the Handset or presses the [SPEAKER] button, the System will act
as if the User pressed the pre-defined digits prior to going Off-Hook.
- When Delayed Prime Line is set, the User must wait, taking no action until the Prime
Line is accessed; the user receives the ICM Dial tone during this period, and may dial
any valid numbering plan digit(s) or select a Flex button or Feature button.
- If the Prime Line Delay Timer is greater than Dial Tone timer, Delayed Prime Line will
not activate; it will be necessary to reduce the Delayed Prime Line Timer or extend the
Dial Tone timer.
- If Prime Line is set without delay, the Station can only place a call; to make any other
action such as Call Transfer, or Conference Call, the Auto Dial Pause Timer must not
be set to 0.
OPERATION
Digital Phone
To access the Station Prime Line:
Lift the Handset or press the [SPEAKER] button; take no action (wait), Prime Line will be
accessed as designated.
Release 1.0
November 2010