Technical data

Off-Hook Signaling 6-14
Chapter 6: Digital Phone
MBX IP Description / Operations & Programming Guide
Off-Hook Signaling
This Feature is based on the DN Feature. When an Off-Hook Station receives a call or a CO/IP
Call rings into the System for the Off-Hook Station, the Station will receive the assigned
Off-Hook Ring signal for Intercom Calls, Camp-On, Call Wait, or Voice-Over Announcements.
For Calls with a different DN, Off-Hook Ring signaling may be received with LED notification.
Off-Hook Ring signaling delivered to the Digital Phone Speaker either may be a Muted Normal
Ring signal or a Single Burst Tone based on the System assignment.
CONDITIONS
- While using the Speakerphone, a Camp-On tone is provided over the Speaker in
place of the assigned Off-Hook Ring signal.
- Activating the DND or One-Time DND places the Station in DND, terminating any
Off-Hook signaling.
- Off-Hook Ring signals terminate when the call is Answered, Forwarded, or
Abandoned.
- The Station will receive Normal Ring signals following return to Idle status.
OPERATION
System
If set, Off-Hook Ring signal operation is automatic.
PROGRAMMING
Station Data
DN Member (PGM 130 - FLEX 2) … see details on page A-32
Camp On Access (PGM 133 - FLEX 8)… see details on page A-35
Call Wait Access (PGM 133 - FLEX 7) … see details on page A-35
PGM 133 BTN RANGE DEFAULT
CAMP ON ACCESS -- enable camp-on feature. 8 0: Disable
1: Enable
Enable
PGM 133 BTN RANGE DEFAULT
CALL WAIT ACCESS -- enable to leave a call wait
when a called station does not answer or in DND
state.
7 0: Disable
1: Enable
Enable
Release 1.0
November 2010