Technical data

Call Forward 3-16
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
- An unlimited number of stations may be set-up in a Call Forward chain, forwarding
calls from one station to the next. However, the Call Forward service counter is
restricted by the ‘Multi-Call Forward Service Count’ attribute (tenant based).
- No Answer Forward employs the Station No Answer Forward Timer.
- The No Answer Call Forward Timer can be adjusted at the PGM 141, FLEX 4.
- A Station should have Off-Net Forward access privilege to assign a CO Access code
and External Phone number to the forward destination.
OPERATION
Digital Phone
To activate Call Forward, Unconditional or Busy/No Answer:
1. Lift the handset or press the [SPEAKER] button to receive a dial tone.
2. Press the [FWD] button.
3. Dial 1-4 {Forward Code} as appropriate.
4. Dial the station or station group to receive calls.
OR
5. Dial CO Group Access code and desired external phone number.
6. Press the [SAVE] button to save.
7. Replace the handset, return to idle.
To activate Call Forward, Remote (Follow-me):
1. Lift the handset or press [SPEAKER] button to receive Dial tone.
2. Press the [FWD] button.
3. Dial 0 {Call Forward code}.
4. Dial the Station’s Authorization Code (Station number + password),
5. Dial 1-4 {Forward condition}.
6. Dial the destination station or station group. OR Dial CO Group Access code and
desired external phone number.
7. Press [SAVE] button to save.
8. Replace the handset, return to idle.
To deactivate Call Forward:
Press flashing [FWD] button, Call Forward will deactivate; [FWD] LED button is turned
OFF.
Release 1.0
November 2010