Technical data

Auto Release of [Speaker] 6-4
Chapter 6: Digital Phone
MBX IP Description / Operations & Programming Guide
Auto Release of [Speaker]
After completion of certain features, the [SPEAKER] will turn OFF automatically, returning the
Digital Phone to Idle.
CONDITIONS
- Auto Release of [SPEAKER] also applies to features including Call Park, Call Back,
Call Forward and CO/IP Queuing.
- If erroneous data is entered in Station Programming, an Error Tone is received and the
User must correct the error before the station will return to Idle automatically.
OPERATION
System
Auto Release of [SPEAKER] operation is automatic for supported features (refer to
Conditions).
RELATED FEATURES
Call Park … see page 3-24
Call Back … see page 4-11
Call Forward … see page 3-15
CO/IP Queuing … see page 3-45
HARDWARE
Digital Phone
Automatic Speaker Select
Digital Phones programmed for Auto Speaker Select can access a CO/IP line or an Internal Call
by pressing the appropriate button without the need to lift the handset or press the [SPEAKER]
button. Audio from the CO/IP Line or Called Station is sent to the Speaker as if the User
pressed the [SPEAKER] button and the Speakerphone MIC is activated.
OPERATION
Digital Phone
To access an Internal or External System Resource: 1. Press an assigned {FLEX} button for the
appropriate resource; the [SPEAKER] will be activated.
Release 1.0
November 2010