Technical data

Auto Called Number Redial (ACNR) 6-2
Chapter 6: Digital Phone
MBX IP Description / Operations & Programming Guide
Auto Called Number Redial (ACNR)
A Station User can request to have the System retry a Busy or No Answer External Call until
the call is connected or the feature is cancelled.
CONDITIONS
- The applicable Timers and Retry Counter must be programmed, - ACNR Pause
Timer: Determines the time allowed between ACNR retries. - ACNR Retry Count:
Determines the number of times the System will retry before ACNR is automatically
cancelled.
- The call will be placed on the same path as originally used; if the path is Busy, an
available CO/IP line in the same group will be seized.
- The ACNR Retry Counter decreases by one each time the System completes the
Dialed Number.
- When the ACNR Pause Timer expires, if the station is in a Busy state, the ACNR
Delay Timer is invoked.
- Upon completion of dialing, the System will monitor the call for progress signals.
OPERATION
System
If programmed, System operation for ACNR is automatic.
Digital Phone
To activate ACNR:
1. While receiving a Busy notification or No Answer, press the [MSG/CALLBK] button,
OR
2. Press the {ACNR} Soft button.
3. Hang-up handset, or press [SPEAKER].
To cancel ACNR while phone is in Idle state:
Press the flashing [MSG/CALLBK] button.
To cancel ACNR during an ACNR attempt:
Lift the handset, press the [MUTE] button, or press the flashing [MSG/CALLBK] button.
Release 1.0
November 2010